Big Little Wars: Post 2 - Update on Gate Walker Battles

Three new Combat Armor Suits representing the mecha in my universe.

Well, I threw my current draft, mostly notes, together, and sent it to a friend who has shown interest in working with me on the project.

Working title is now Bad Dog; though that may change again.

I've received the first feedback, and I'm excited. It seems it isn't totally crazy of me to write another set of future combat rules featuring mecha. The emphasis being on plausible future warfare with mecha as a part of the battlescape.

So it looks like it's a go for  C4ISR mission (Communications; Computers; Intelligence; Surveillance; and Reconnaissance) with ECM and ECCM, and morale feeding into when the battlefield becomes an internet of connected things.

BattleTech Alternate Universe

  

I read a fun thread on Twitter a little while back asking what opinion would get your BT fan card revoked.

I wrote Kerensky's Exodus was dumb, dumber than a bag of hammers; and later added, The Republic of the Sphere was the best thing ever introduced into BT canon. Obviously, these are just throwaway comments, made in jest, but with elements that stand some further reflection.

It's hard now for those fans who weren't there back in 1984 to understand the appeal of the original 3025 setting.

What you have to remember is that the game was tapping into the whole Mad Max vibe that swept the West, click here for a wiki article. Not forgetting the timing of Mad Max Beyond Thunderdome released in 1985.

So when FASA's BattleDroids arrived, the whole 'previous technology was 'made better in the past' resonated with me and countless other wargamers. Yes, it was obvious that this would have to change, because the Inner Sphere would have had to have been knee deep in Battlemechs to keep them on the battlefields of the future.

Hence my love for the William Keith Grayson Carylisle Gray Death stories, which is all about finding lost tech.

The recent successful KickStarter, with the new plastic mechs from Catalyst have revived people's interest in BattleTech. I haven't played a game in quite a long while, but have fond memories of fun times. Okay, I'm totally obsessed with stompy robots!

However, later on, I got into a bit of a tiff with a guy on FaceBook about combined arms games, which was resolved after some comments.

My assertion remains that there's a sweet spot for playing games of classic BattleTech, and furthermore hover tanks used aggressively can unbalance the game. I was told that using fusion powered hover tanks was cheesy. I kind of agree, but only because I think that cheesy is just shorthand for edge cases breaking the rules.

On further reflection, I think that BattleTech would be better focused on gladiatorial arena games, because the super crunchy game mechanics are already borderline rpg character focused. Furthermore, one could tinker with the time and groundscale for more in the cockpit verisimilitude. Yes, this would turn BattleTech into a Solaris game, but that's not a bad thing.

I think the original Solaris game was a road BattleTech should have taken. Obviously, opinions will differ. Then focus the desire for combined arms battles using Alpha Strike. But that's just my opinion.

But, here we are entering a revival of the classic game, and that I think all would agree is a good thing.

Buggeration

  

I started painting my Buster and during the process I checked the fit of the arm with the rotary cannon and... you guessed, it now fouled with with the backpack engines. Doh!

So I pulled the backpack off the torso, and in the process of doing so chipped some of the paint off.

Hence the title, buggeration.

Engine cylinders blocking the arm from depressing.

Fixing this required remodeling, and so I'm back to square one; only to discover that the missile pack would no longer fit after repositioning the engine cylinders.

More gritting of teeth ensued.

I tried hanging the missile pack off the roll bar, but my first attempt broke, as the part was load bearing. So I thought things through and made a replacement that wouldn't break. 

A montage of the parts modification process.

And here we are, back at square one.

I know. There, there. How sad. Never mind.

 

Fingers crossed everything goes well from here on. The setbacks with trying new techniques has some bright spots, in that I've learnt a hell of a lot about painting glazes, and what I have to do to achieve a finish that resists wear and tear.

So now it's back to painting. Catch you all on the bounce.

Acquisitions of a VOTOMS Kind

Arctic Gear 1/48th scale toys.

It is no secret that I like the anime show Armored Trooper VOTOMS. It has become my favorite source for mecha inspiration. So much so that I wrote three novels that feature mecha inspired by the franchise. I also own  a bunch of Takara 1/144th scale VOTOMS, a 1/35th model, and an enormous 1/12th toy Scopedog in my collection.

While I had a plan to play wargames with the 1/144th models, the availability of more models, especially the enemy Fattys proved a stumbling block.

That led me to discovering Dream Pod 9s Heavy Gear range, and I got a bunch of models from them, but the choices available for 12mm infantry doesn't allow for what I consider a satisfactory representation of the power armor suits.

Three partially assembled Scopedogs.

 

The Arctic Gear range are nice models, but generally very pricey. However, I've been lucky and managed to score a Reeman squad box set, at a bargain price. So now I can make a squad of four Scopedogs.

As you can see they're partially assembled, but there's a big pile of parts to be added to complete them.

That's a lot of parts.

By comparison the Burglary Dog variant I featured before that provides alternative variant parts for the legs, and needs more assembling to ready it for the tabletop.

Quite an array of alternative parts.

 And just for completeness, here's the above models extra parts.

The provision of details parts is wonderful.

When I'll get around to assembling these beauties is moot. Currently I'm deep into my RAFM conversions, which has turned into a sorry tale of missteps that have led to a shed ton of extra work. But I'll write about that more next time.

Until then, remain well, stay safe, and catch you all on the bounce.

WIP: Reposing Finished

Left to right: standard CASE-2X Dog, CASE-2XC-Mod:2E Command Dog, and CAS-4CP Buster.

After the paint peeled off these models, stripping them back to bare metal effectively meant I'd taken a one step back towards completing this project. Its not as if I don't want to finish them unless they're perfect, though there's some truth in my wanting to make them look as good as possible.

Instead, it's more like I think it would be a shame to waste an opportunity to try and make the most of a bad outcome, as I didn't want to let all the work I had lost bring me down.

So I chose to see it as a second chance to do the best job I can with these classic RAFM miniatures.

The various shots that follow show where I cut the joints when rebuilding the models, using a combination of Kneadite (green stuff) and Milliput.

Green stuff is easier to sculpt when you want organic shapes, but Milliput is better for filing into shape when you want flat surfaces, and parts to be square. But on more than one occasion I mixed them both together, because green stuff can be annoyingly sticky to work with.

The work I carried out included re-sculpting the arm joints on the model on the left, and then rotating the left hand so it sits better with the main gun. 

I also reposed the legs of the other two models. In addition, I rebuilt the torso of the model on the right. I might, if I can figure a way of doing so, make a flexible ammo chute feed for it too.

Doing so would give me more flexibility when pose it for pictures, as now all the arms and the torsos on the models can be moved.

But, I'm pleased at how their stances turned out. I think they look more dynamic now, and it has motivated to get on with painting them – again!

Unfortunately, these shots don't show the work I've done texturing the bases sculpting in foot prints and track marks. The feedback from the first two models I finished  pointed out that the bases were a bit bare. 

I thought the critique was fair. The bases were a bit plain.

I'm not big on fancy bases, but given the amount of work I've put into these I thought I'd give it a go, and see what I could do to raise my game. After all, it can't hurt.

And finally, given this project turned into a labour of love, here's a reminder of what they looked like the first time round. I think I can safely say I've definitely taken them to another level.

As always, thank you all for following my blog. Catch you on the bounce.

Big Little Wars: Post 1 - Gate Walker Battles

After a year that feels like living in the Bad Place, I've started to get some interest back in making models and playing games. I'm still sad to say that I have no mates to play Heavy Gear with, and therefore have little chance of teaching the casual person to play a game I don't fully know how to play.

Also, I'm still struggling still with a lot of self-doubt about my fiction writing. I've gone through a period of stagnation, and at the moment it would be stressful trying to jump back into writing full-time.

So getting back into the saddle too soon might trigger a relapse of my depressive episode.

But writing something would be good for me. So, I have decided that I might try writing a set of rules for the Gate Walker universe setting. If only because it will be easier to teach people to play a new game if I wrote rules.

I may be biased, or deluded, in holding that opinion, but I do have the previous experience of designing game rules from writing OHMU War Machine.

Given the amount of time between the last time I considering writing a set of rules for my setting, it's time to reassess my options. My previous thoughts on the rules centered around updating the command control rules, and revising the available units to reflect my Gate Walker universe.

However, I'm unconvinced that I still want a set of rules that can handle battalion and larger sized combat groups. Also I might need to consider the option of being able to play solo as well. But I do know I want to capture the feel of #RealRobo combat.

I know, I know, what does that even mean?

1. Capture the feeling of future warfare with power armor etc.

2. Detailed enough for squads with support elements to make combined arms platoons.

3. Command and control rules, so the player acts at the level of each squad commander.

The first goal is a bit like being General Haig at the start of WW1. It's like me having to face the challenge of learning how to fight a war where technology has moved the goal posts on what works and what doesn't.

Fortunately, I won't have to put real people through the grinder.

Second, what do I mean by squads?

I'm thinking two to five people or vehicles per unit. A platoon would be three to five squads, so a combined arms platoon would be between ten to 25 infantry or to six to ten vehicles.

Optional off table support will be available to represent assets available to the combined arms platoon like: satellites; artillery, air-support etc.

Finally, I want the command and control rules to be a bit like Chain-of-Command.

Players get dice to roll that generate the number of commands they can give a turn (thinking this could represent limitations from bandwidth, ECM and ECCM that battles generate). But also allow them to focus on what heroes can bring to the action.

That sounds like a reasonable set of goals, but whether I can write a set of rules that other people want to play remains unknown. And now I have to think of a name for them. Please feel free to make comments now, before I start writing.

I'm sure this blog that will make my friend Roger laugh, as he predicted I end up trying to write my own set of wargame rules.

Silver Lining

  

Allegedly, every cloud has one. I decided to strip another mech, because I chipped it and trying to correct that the problem led to me peeling off a whole chunk of paint. However, looking on the the bright side, I can magnetize the torso, which is an upside.

When I started this conversion I only had one Grizzly, but in the intervening months two more have come my way.

Both of those were in better condition than my original, though still exhibiting casting flaws, and the one thing bugging me about my model was the casting flaw. So, razor saw in hand, I started cutting parts off one of the spare Grizzly's.

I've also taken the opportunity afforded me by breaking the model down into its component parts to clean up what had been hard to reach spots of filler, and make everything look tidier in the process.

 

Okay, that's a bit of an epic journey for such a small improvement, but that's the way I roll. Okay, that's it until next time. Catch you all on the bounce.

Catastrophic Delamination

Well that's a first. While blending the paint, I overworked the surface, and the paint delaminated. I tried to fix the problem, but more paint peeled off.

Oops! A very big oops.

Ooh, what a horrid mess I made.

Then I tried to clean the area, but only made it worse. And as you can tell this is a very sad story that ends with me stripping the model back to bare metal.

However the arms turned out well, so there's that to be grateful for. Count your blessings.

Not a brilliantly sharp shot, handheld, but hopefully you can see the blending?

And because I knew I was entering uncharted territory, trying out new techniques, I still have the other three models to practice on. I'll try not to overwork the paint and avoid making the same mistake twice.

I see myself rewatching a blending tutorial again, paying closer attention to how to not delaminate the paint.

So that all from my workbench for this time. Catch you on the bounce next time.

An Acquisition & Taking it to the Next Level: 2

Still shading these, and this picture is mostly for record keeping, and illustrating my painting process.

In other news, my beloved bought me this kit.

Didn't realize it was a kit, but no big deal as it will just make the conversion into a Panzer Jäger Cybertank – from my The Last War: World of Drei stories – that much easier.

Yes I have plans. Cue laughter...

Taking it to the Next Level: 1

I've moved my next four conversions forward one more step.

This has been a bit of a journey, learning to put techniques together in different ways, and I'm certainly coming up with a different way of getting to the look that I want.

Refining the process so that next time, hopefully, I will be able to get the unpainted model to finished quicker. But, no guarantee, because art is art.