Monday, 6 October 2025

OMWB: Newten Town New Direction WIP 1

So, this weeks tales of adventure, its a story of two steps forward, one step back, as I began re-working this building.

My objective is to fettle what I saw as faults with the model. I didn't do any serious prep when I first painted it back circa 2016 'ish.'

The circa and 'ish' are doing a lot of work here, as the first boards were built in 2010. 

 

Yeah, I'm an inveterate fiddler who can't leave stuff well enough alone. This was the building I removed from the original town board to paint graffiti on the other buildings as seen here.

 

I started by cleaning up the resin building by removing blemished and defects that arose when poured into a mold. This included filling in gaps, and getting rid of seems in the original master, using plastic putty.

Then added a base with a pavement around the structure. After that I reworked the roof, which I managed to completely muck up big time, as can be seen below.

 

My first attempt ended up warping, from a combination of using a piece of 20 thou plasticard and 'No More Nails' glue to try and level the roof casting. The 'No More Nails' didn't harden properly, and as a consequence the resin roof warped.

So I snapped it apart, and rebuilt it on a thicker 40 thou piece of plasticard. Twenty thou is half a mil, and 40 thou is 1 mil thick. I also used super glue to make sure it stuck together, and then filled in all the cracks to restore the roof to a serviceable condition.

A serviceable condition meaning, bashed and battered, but still functionally a roof.

And this is as far as I got over the course of a weekend. All of the above is a lot of work for very little forward progress.

I'll catch you all on the bounce.

No comments:

Post a Comment