New Dremel

My beloved decided she would buy me a new Dremel to replace the old one I broke one, which had delivered sterling service for nearly 25 years, before I busted it.

The old one was 125 watts, my new one is 175 watts. So it has a lot more oomph.

We also got a new hot glue gun because working on the trees has led me to the conclusion that sticking seafoam to Woodland Scenics armatures is tricky.

I tried E6000 plus, but it takes too long to set and the seafoam sags. I also got some spray contact adhesive to try, but it's way too messy for the confined area I have to work in.

So, hot glue it is.

Again, I'm doing fiddly small stuff so need to be able to control the flow, and my old glue gun was anything but easily controllable.

Forest Full of Trees

I've assembled some of the large deciduous trees from Woodland Scenics. These trunks still need texturing, which is just brushing on texture paint/gloop.

Super easy to do, barely an inconvenience.

And these are some pine tree armatures, along with a deciduous trunk I've butchered, and three underbush saplings that I'm making as an experiment.

And below is  is my forest, all the trunks painted and based ready to apply the seafoam branches.

Great Birnam wood is one step closer to arriving and delivering the prophecy.

Dremel Embuggerance

Those who follow me on Facebook will know that I broke my Dremel. Too much force when using it caused a stall, and it stopped working.

The saga of trying to find a spare rivals one of the greatest tales ever told (only a slight exaggeration). This armature is no longer made, but we have the internet, and I found samples for sale around the world.

Huzzah! All good, right?

Nope. The Australian dealer won't ship internationally, and the Italian dealer can't ship to the UK either, Which sucks.

So I moved to Plan B.

Plan B was to try a physical repair of the damaged commutator, which Susan did, as it required soldering the delicate broken wires together. Afterwards I did the less delicate gluing, and bodging to secure the broken piece so that it won't come apart at 33,000 rpm.

That repaired failed, so now I moving to Plan C and buy a new Dremel.

Old School Sculpting

I came across this video, Miniature Figurines in the Old Days, quite by accident while perusing YouTube, as one does. I'd heard of the technique, but never seen it demonstrated.

I'm glad my experience back in the day was with wax for making jewelry lost wax masters, because soldering and carving metal is a bitch.

Consider this a public information broadcast.

Types of Forests

Click to embiggen: a perfectly cromulent word.

I always wondered what was the difference between a wood and a forest, or a jungle. So now I'm making a forest I thought it might be good to go and find out for myself.

I now know far more than I ever thought I needed to know about woods and forests.

1. Temperate Coniferous Forest 

Found where warm summers and cool winters and enough rainfall to sustain the trees. Species found including cedar, cypress, Douglas fir, fir, juniper, pine, podocarpus, spruce, redwood and yew. The understory also contains a wide variety of herbaceous and shrub species.

2. Sub-Alpine Coniferous Forest 

Conifer forests are typically found on steep, rocky, north-facing slopes.

3. Freshwater Swamp Forest 

Either permanently or seasonally flooded by freshwater, they can be found in a range of climate zones: boreal; temperate; sub-tropical; and tropical. Normally found along the lower reaches of rivers, and around freshwater lakes.

4. Lowland Equatorial Evergreen Rainforest 

These forests occur in a belt around the equator, which receive with more than 2000mm or 80 inches  rainfall annually.

5. Secondary Forest (Second growth)

This is where there has been re-growth after a large event: fire; insect infestation; timber harvest; or wind throw, after a long enough period has passed and the effects are no longer evident. One sign of this is that the trees are spaced closer together and they have less undergrowth.

6. Mangrove Forest 

These consist of salt tolerant trees and shrubs that grow in coastal saline or brackish water that thrive in low oxygen (anoxic) waterlogged mud.

7. Boreal or Taiga Forest

Mostly coniferous forests consisting mostly of pines, spruces and larches, and aside from the oceans these make up the world's largest biome.

8. Peat Swamp Forest

These are forest wetlands in tropical and subtropical areas with poor drainage and waterlogged soil, which prevents dead leaves and wood from fully decomposing. 

And below an illustration of the typical profiles of temperate versus tropical forests.

Also, click to embiggen.

I, of course, want a generic enough forest that I can use it for tropical and temperate set wargames. So my plan is to swap out specific trees using the bases in my previous post. I'm currently waiting on some E6000 Plus glue so that I can start applying seafoam to the trunks I've prepared.

It's a cunning plan, and we shall have to see if it works.

Forests

Oh no, what have I done? I looked at my old work on these trees with clump foliage and decided they weren't up to snuff. Do many hours later after dipping them in hot water and peeling off the clumps I'm back to square one, bare armatures.

But, the trunks are all based, textured up with gloop, and ready for the next stage.

So what is the next stage?

I've ordered some dried seafoam, and started saving tea leaves for foliage. I've also ordered some Woodland Scenics TR1125 large deciduous tree armatures, some coconut palms (because why not), bamboo shoots (because I didn't have any).

All good. And for shits and giggle I ordered a large plastic tree.

I plan to model an emergent tree (a tree that stands above the primary canopy) using the model in the photo.

Yeah that foliage is going to need replacing, which will need a lot of work to make it look good.  But, it has the big advantage of being cheap.

The alternatives I looked at were triple the price. So, cheap is good.

This is definitely a case of "I may be some time."

Desert Oasis and Ruins

Ta da... three oasis bases completed. Look at the reflections on the acrylic liquid water. Pretty pleased with how these bits of terrain turned out.

Below the fallen pillar.

The ruined head of some ancient god. Could pass as a very stylized Anubis or Khnum I guess. Let me know what you think?

And, the next project. The bases for my forest/jungle. 

The one in the center/bottom has had its edges beveled, which I should've done before painting. However, it was only after assembling them and priming did I realize that I needed to do so.

As they say, things are obvious in hindsight.